1 April 2021 / COVID-19

Greater Brisbane Lockdown & Restrictions Post-Lockdown

The Queensland Premier has announced that the 3 day lockdown in the Greater Brisbane region will end at 12 noon today (Thursday).

Some restrictions will remain in place for another 14 days until Thursday, 15 April 2021 – please read the below carefully. It is important to continue to implement and follow all of Hutchies’ COVID-19 measures across our sites and offices.

Restrictions for Queensland

The below requirements have been taken directly from the Queensland Government directions.

From 12pm today, until 15 April 2021 for all of Queensland:

> you must carry a face mask at all times and wear indoors, unless you have a lawful reason not to

> gatherings in people’s homes are limited to 30 persons in total, including the people you live with

> you can leave your home for any purpose. You can travel anywhere in Australia. Please note other states and territories may have restrictions in place that prevent you from travelling to them

> visitors to aged care facilities, disability accommodation services, hospitals and correctional facilities are restricted across the state

> restaurants, cafes, bars and nightclubs can only open for seated eating and drinking, no standing allowed

> hospitality businesses must keep an electronic customer register > customers must check into venues and provide their contact details in case you need to be contacted – download the Check In Qld App to get setup before you visit venues

Masks for Queensland

The below requirements have been taken directly from the Queensland Government directions.

You must carry a face mask with you at all times when you leave home, unless you have a lawful reason not to.

> you must wear a mask in indoor spaces

> it is strongly recommended you wear a mask when outdoors if you are unable to stay more than 1.5m distance from other people, such as busy walkways and thoroughfares

> masks do not need to be worn in some circumstances, including children under 12 years, if you have certain medical conditions, and in workplaces where it is not safe to do so > you can remove your mask to consume food or drink

Other Requirements

Anyone who has visited Brisbane since 20 March

> must still observe the above rules (including wearing a mask as required) regardless of where you are now in Australia

Anyone visiting Queensland in the next 14 days 

> must also observe the above rules (including wearing a mask as required) throughout the entire state

H-COVID19-Comms-Icons-General-Travel-10.png

Good Hygiene

Wash your hands often for 20 secs & use hand sanitiser in between

H-COVID19-Comms-Icons-General-Travel-13.png

Coughs & Sneezes

Cover a cough or sneeze, wash your hands & dispose of any tissues safely

H-COVID19-Comms-Icons-General-Travel-12.png

Don't Touch!

Avoid physical contact & don't touch your eyes, nose & mouth

H-COVID19-Comms-Icons-General-Travel-20.png

Social Distance

Maintain 1.5 metres distance from people where practicable

H-COVID19-Comms-Icons-General-Travel-14.png

Regular Cleaning

Clean work areas, common facilities (kitchens, bathrooms etc) & frequent touch points often

H-COVID19-Comms-Icons-General-Travel-15.png

Symptoms

Stay home & get tested if you have the symptoms (even if you think it’s ‘just a cold’)

H-COVID19-Comms-Icons-General-Travel-16.png

Follow Directions

Display, read and follow all of Hutchies’ posters and signage around sites and offices

H-COVID19-Comms-Icons-General-Travel-19.png

Face Masks

In high risk situations or when you cannot social distance, wear a face mask

H-COVID19-Comms-Icons-General-Travel-22.png

Stay Informed

Monitor Hutchies’ Toolbox for the latest information and advice

Symptoms

COVID-19 is the disease caused by the coronavirus, SARS-CoV-2. 

Coronaviruses are a large family of viruses that cause respiratory infections. These can range from the common cold to more serious diseases.

Symptoms of COVID-19 may include:


Fever

Coughing

Shortness of Breath

Sore Throat


If you need advice, call Australia’s COVID hotline 1800 020 080 (24 x 7)

Other Recent Activities

View all activities
30 October / Quality Alert

Engineered stone ban effective 1 July 2024

ALL engineered stone regardless of the silica content percentage will be banned


Alternative products must be considered and implemented on all projects.

The industry is shifting away from engineered stone due to the risks of respirable crystalline silica, which can cause silicosis and other silica-related diseases. Although the consultations are under way and there has been no official announcement by Federal or State Governments on the issue, the health and safety risks along with the uncertainty around this issue warrants a decision to ban all engineered products entering job sites nationally. The ban will take effect on 1 July 2024 and will extend to ALL engineered stone regardless of the silica content percentage. 

An update to this alert will be provided before the end of the year when the Federal and State Governments are expected to issue a formal decision on the ban. In the meantime, to mitigate the impact of potential delays and variations, the best approach is to inform the clients of the pending ban and to propose and seek approval for an alternative product. Similarly, ensure all future estimates have the stone specification qualified and priced accordingly.

Product alternatives going forward include:

Compact Laminates

  • Under 1% silica content
  • Extremely competitive pricing
  • Only comes in 12mm thickness
  • Heat resistance is an issue
  • Product not suitable for high end applications

Porcelain Surfaces

  • Under 10% silica content
  • Price dependant of product and supplier
  • Large variety of colours and thicknesses (4, 8, 12, 20 and 30mm)
  • Great resistance to staining, scratches, UV and heat
  • Good warranty terms

Acrylic Solid Surfaces

  • 0% silica content
  • More expensive alternative
  • Limited thickness availability
  • UV stable and heat resistant but direct heat exposure not advised
  • Minimising wastage through flexibility in sheet sizing
  • Seamless joints

Natural Stone*

  • Various silica content percentages
  • Variety of products at different price points available
  • Ongoing maintenance may be an issue
  • Unlikely to satisfy specific warranty requirements

*Although this alert does not directly impact natural stone, some types have high silica content so risk of using these on projects should be considered carefully.

For an up-to-date list of available products and their usability, click here.


More information

If you need additional support, please contact the Quality Team:

Phone 1300 HUTCHIES
Email QualityTeam@hutchinsonbuilders.com.au

View More
10 October / Update

Make sure bin chute systems are installed correctly, following the tested systems and the manufacturers’ instructions.

Check the detailed drawings from Elephant’s Foot and Wastech for different wall types (plasterboard, shaft-liner, speed panel, concrete, Hebel, and masonry).

Any changes to the tested systems must be approved by your project certifier, signed off by the fire engineer in the fire engineering report (FER), and accepted by the relevant state / territory fire service.

View More